Fanin board prototype schematic page descriptions

Page1:  J1, J2 J0 and front panel connectors
        Includes ESD strips, and the Power fusing and LED.
NOTE: none of these boards have any VME bus connections so 
      very few differences exist between the versions at this time.

      The Test version is intended to be used without a backplane
      and allow all the signals from 8 tracer return cables to be fed
      to a single RXPT module.

        
Page2: The Done/Error/Busy functionality of the board is on this page.
      Contains the data path from front panel connectors featuring
      many grounding options ( the GR? and GC? components are optional
      additons ).  Signals are routed and buffered onto the J5/J6       backplane connector.  Only the 9Ux400 ( front ) version of
      this board is equipped to handle the L1 Done signal from the SRC
      which is driven back out the front panel to the TSI crate.

--Thurston Chandler 9/98
  Yale CDF Group